Access The Tflash On The Phone; Power On/Off Your Phone; Idle Screen; Signal Strength - Zte T6 User Manual

Hsdpa multi band 3g mobile phone
Hide thumbs Also See for T6:
Table of Contents

Advertisement

ZTE T6 User Manual
2. Slide down the cover and remove the battery.
3. Carefully slide down the TFlash card holder to release the lock and raise.
4. Remove the TFlash card from the card holder.
5. Lower the card holder and lock by sliding the holder up.
6. Re-insert the battery and close the back cover.
Caution:
Do not remove the memory card while reading or writing to the card. Doing so may cause data
corruption on the card or phone. If possible, insert and remove the memory card while the
phone is powered off.
You'd better use your phone to format your memory card. If you want to format it on your PC,
please select FAT Formatting type. Otherwise it might cause the memory card not identified by
your phone.

Access the TFlash on the Phone

1. Press the OK Key [Menu] in idle screen to open the main menu.
2. Select File Manager or Tools > File Manager and press the OK Key.
3. Press the Right Key to access the TFlash card interface.

Power on/off your phone

Press and hold the End Key to power on your phone. When asked, enter your PIN (Personal Identification
Number) code or handset code and press the OK Key to confirm.
The PIN code is the password provided by your network service provider. You need this password to use
the (U)SIM card. When the entered PIN code or handset code is accepted, the phone will automatically
search for the designated network. After a few seconds, your phone will show the idle screen.
To power off the phone, press and hold the End Key from the idle screen.
Warning:
Do not power on your phone if wireless phone use is prohibited, or when it may cause interference
or danger.

Idle Screen

The phone is ready for use when the name of the service provider is displayed on the idle screen.
Press the Left Soft Key to access Messages interface.
Press the Right Soft Key to access TalkNow interface.
Press the OK Key to access Main Menu interface.
Continually press the End Key to return to idle screen from any situation.

Signal strength

The signal strength icon shows on the top left corner of the display. More bars indicate a stronger signal.
For example,
indicates strong signal.
Notes:
Confidential and Proprietary Information of ZTE CORPORATION 19

Advertisement

Table of Contents
loading

Table of Contents