BellSouth GH5815 Owner's Manual page 14

manual 5815 analog.qxd 3/16/2004
Getting Started
2:40 PM Page 14
Press the
dial tone. If you do not get a dial tone, review steps
3 through 11. If you still do not have a dial tone,
refer to the Problem Solving section on page 29.
Belt Clip Installation
With the back of the HANDSET facing up, insert
one side of the BELT CLIP HOOK into the
matching slot at the top side of the HANDSET.
Press down on the opposite side of the BELT CLIP
until the other hook locks into the slot on the side
BELT CLIP HOOK of the HANDSET.
You are now ready to use your new
BellSouth Cordless Telephone.
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.
7
button to confirm that you have a
Talk
Desk Mounti