Texas Instruments TI-nspire Getting Started page 84

1. From an open document, press
Document Settings
The Document Settings dialog box opens.
e
2. Press to move through the list of settings. Press
through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press
view values for each setting.
£
4. Press the
x ·
or
5. Click OK or press
document.
The Home screen opens and the new settings are only applied to the open
document.
To apply the new settings to the open document and to documents created
in the future:
• Select Make Default and press
• Click OK to apply the settings to any open documents and save the
settings as defaults for new documents and for Scratchpad.
Restoring Document Settings
Complete the following steps to restore the original factory settings to open or
new documents and to the Scratchpad.
1. From the Home screen, press
The Document Settings dialog box opens.
84 Configuring Handhelds
).
¤
and keys to highlight the desired option, and then press
to select the value.
x ·
or
c 5 2
¢
to open the drop-down list to
to apply the new settings to the open
x ·
or
5 2
( Settings > Document Settings ).
c
(
> Settings >
£
to move backward
.