Driving With A 3-Speed Automatic Transmission; Engine Starting - Daewoo Cielo Owner's Manual

DRIVING WITH A 3-SPEED
AUTOMATIC TRANSMISSION*
The shift lever has six positions.
P (Park) ñ For starting the engine and/or
holding the car in locked position.
R (Reverse) ñ For backing the car.
N (Neutral) ñ An alternate position for
starting engine.
D (Drive) ñ For all normal forward driving.
2 ñ For difficult driving conditions in 1st
and 2nd gear, and engine braking when
descending moderate grades.
1 ñ For extreme driving conditions in 1st
gear.
release
knob
Selector lever lock
Push the release knob located under the
selector grip when engaging "R" and "P"
and shifting from "D" to "2" and "2" to "1" as
indicated by the black arrow "
The selector lever can be shifted freely
into any positions indicated by the white
arrow " ".
: pull the : normal
shift
knob
pul l
P R N D
WARNING
Always depress the brake pedal while
shifting from "P" (Park) or "N" (Neutral)
to a forward or reverse gear, to help
prevent the vehicle from moving
unexpectedly when you shift
2ñ10

Engine starting

The selector lever must be in "P" or "N"
position to start the engine.
Starting the car
".
ï After starting the engine, fully depress
the foot brake pedal before shifting the
selector lever to the "D", "R", "2" or "1"
position. Be sure the vehicle is fully
stopped before attempting to shift the
selector lever.
1. Keep the foot brake pedal depressed
and shift into a driving gear.
2 1
2. Release the parking brake and foot
brake, then gradually start the vehicle
with depressing the accelerator pedal
slowly .
R
D
2
1