Wi-Fi - HTC SAPP300 User Manual

Wi-Fi

Wi-Fi provides wireless Internet access over distances of up to 300 feet (100 meters).
To use Wi-Fi on your phone, you need access to a wireless access point or "hotspot".
Note
The availability and range of the Wi-Fi signal depends on the number, infrastructure,
and other objects through which the signal passes.
To turn Wi-Fi on and connect to a wireless network
1. Press HOME, then press MENU, and then touch Settings > Wireless controls.
2. Select the Wi-Fi check box to turn Wi-Fi on. The phone will scan for available
wireless networks.
3. Touch Wi-Fi settings. The network names and security settings (Open
network or Secured with WEP) of detected Wi-Fi networks are displayed in the
Wi-Fi networks section.
4.
Touch a Wi-Fi network to connect. When you selected an open network, you
will be automatically connected to the network. If you selected a network
that is secured with WEP, enter the WEP (security) key and then touch
Connect.
Notes
• The next time your phone connects to a previously accessed secured wireless
network, you will not be prompted to enter the WEP key again, unless you reset
your phone to its factory default settings.
• Wi-Fi networks are self-discoverable, which means no additional steps are required
for your phone to connect to a Wi-Fi network. It may be necessary to provide a
username and password for certain closed wireless networks.
Getting Connected 131