Warranty; Important 911 Emergency Response Information; Declaration Of Conformity; Ce Mark Warning - Verizon One Talk T49G User Manual

Warranty

The specifications and information regarding the products in
this guide are subject to change without notice. All statements,
information and recommendations in this guide are believed to
be accurate and presented without warranty of any kind,
express or implied. Users must take full responsibility for their
application of products.
Yealink Network Technology CO., LTD. makes no warranty of
any kind with regard to this guide, including, but not limited to,
the implied warranties of merchantability and fitness for a
particular purpose. Yealink Network Technology CO., LTD. shall
not be liable for errors contained herein nor for incidental or
consequential damages in connection with the furnishing,
performance or use of this guide.

Important 911 emergency response information

If you call 911, emergency service responders will be sent to
the registered location you provided when you provisioned this
phone. An incorrect address could result in incorrect routing
of 911 calls and dispatch of emergency personnel to the wrong
location, so please contact us if your registered location is
not accurate.
Data and voice functionality (including the ability to make and
receive 911 calls) will not be available during a power outage,
broadband connection failure or other service disruption.
Neither Verizon Wireless nor any of its affiliates shall be
liable for any service outage and/or inability to access
emergency service personnel, nor shall Verizon Wireless or
any of its affiliates be responsible for the acts or omissions
of emergency response center personnel.

Declaration of conformity

Hereby, Yealink Network Technology CO., LTD. declares that
this phone is in conformity with the essential requirements
and other relevant provisions of the CE, FCC. You can find
the CE and FCC information from the label on the back of the
IP phone.

CE mark warning

This device is marked with the CE mark in compliance with
R&TTE Directive 1999/5/EC.

Part 15 FCC Rules

Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This device is compliant with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired operation

Class B digital device or peripheral

Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
1. Reorient or relocate the receiving antenna
2. Increase the separation between the equipment and receiver
3. Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected
4. Consult the dealer or an experienced radio/TV technician
for help
User guide
33