Electronic Programmer (Only On Some Models) - Smeg SDO10 Instructions For Installation And Use Manual

6.

ELECTRONIC PROGRAMMER (ONLY ON SOME MODELS)

The programmer user instructions are valid only for the large oven.
LIST OF FUNCTIONS
MINUTE-COUNTER KEY
COOKING TIME KEY
END-OF-COOKING KEY
DECREASE TIME KEY
INCREASE TIME KEY
6.1 Clock adjustment
When using the oven for the first time, or after a power failure, the display flashes regularly and
indicates . Press the keys
changes the time by 1 minute either up or down.
Before setting the programmer activate the desired function and temperature.
6.2 Semiautomatic cooking
Use this setting for automatic oven switch-off at the end of cooking time. By pressing key
display lights up, showing
set the cooking time.
Release key to start the programmed cooking time count. The display will now show the right time
together with symbols A and
6.3 Automatic cooking
Use this setting to automatically start and stop the oven.
By pressing key , the display lights up showing
press keys or to set the cooking time.
By pressing key the sum of the right time + cooking time will appear; keep the key pressed and at
the same time, press keys
Release key to start the programmed count and the display will show the right time together with
symbols A and .
After set-up, to see the cooking time remaining, press the key
press the key .
Set-up with incoherent values is logically prevented (e.g. the contrast between a cooking time and a
longer period will not be accepted by the programmer).
Instructions for the user
and at the same time the keys
; keep the key pressed and at the same time, press keys
.
o to regulate the end of cooking time.
o
; keep the key pressed and at the same time,
; to see the end of cooking time
: each single press
, the
o to
9