Belkin PRO User Manual page 14

F1D116_OSD_AM_man.qxd 4/20/00
Usage
Selecting which computer to operate can be done either by On-Screen Display, the
SELECT button, or through keyboard hot-key commands. You will notice that after the
OmniView
1-2 seconds. This is normal operation and ensures that proper mouse synchronization is
established.
The SELECT Button:
Pressing the SELECT button cycles you through all the ports, including inactive ports.
Keyboard Hot key commands:
You can also conveniently command the OmniView
simple keyboard key sequences. To send commands to the OmniView
SCROLL LOCK key must be pressed twice within 2 seconds. You will hear a beep for
confirmation. Below are the different commands:
You can switch directly to any port by giving the OmniView
numbers. For instance, if you press [SCROLL LOCK] [SCROLL LOCK] [2] [5], the
computer on PORT 5 of the OmniView
following diagram, that is PC # 37. Hence, if you only have one OmniView
first key (X) must be "0".
4:07 PM Page 12
™ PRO switches to another computer, the mouse will be inoperative for about
Switch to PREVIOUS ACTIVE port
(on the same BANK)
Switch to NEXT ACTIVE port
(on the same BANK)
Switch to the PREVIOUS BANK
(by default, selects first active port on that BANK)
Switch to the NEXT BANK
(by default, selects first active port on that BANK)
Directly switches to port Y on BANK X.
X = {0 to F} hexadecimal, Y= {1 to G, where ports 10-16
are A-G}
™ PRO to switch ports through
PRO the BANK and PORT
™
™ PRO set to BANK 2 will be selected. In the
12
™ PRO, the
™ PRO, the