Table of Contents
Advertisement
P6FXI-A
Quitting SETUP
After making all modifications in the SETUP program, go to the option "Save
&
Exit SETUP" then press the <Enter> key
.
Press < Y > to confirm the changes made, and the < N > or the < ESC> keys if
further modifications are still necessary before exiting the SETUP
program.
Once
the < Y > key is pressed, the system will automatically exit the program and
reboot. However, if you want
to
cancel all changes made under the SETUP
program, go to the option "Exit Without Saving"
.
Press <Y> and the system will exit the SETUP program then reboot without
saving any of the changes made.
You maya/so use the <F10> key to save the new settings.
User's Manual 4-18
Advertisement
Table of Contents
