Whirlpool AWO/D 43115 Service Information page 53

SERVICE
According SPC the kit is available from week 14/2009 onwards.
Text
It has to be installed in the inlet valve. The original flow rate limiter (red, 8l/min)) has to be removed. Then the new one
(yellow, 5.5l/min) has to be mounted together with the new sieve. Original sieve could be too long and destroy the limiter
when fixing the inlet hose. The set can only be used if the water inlet pressure is higher than 4 bar, otherwise there is a risk
to create a failure indication of too less water inlet.
© Whirlpool EMEA
Whirlpool EMEA
Customer Services
8592 336 10008, 08/28/08
page 53 of 53
www.scc-service.com