Smeg A21X-6 Instructions For Installation And Use Manual page 17

Smeg oven instructions for installation and use
Table of Contents

Advertisement

Instructions for the user
Cooking start: as well as setting a cooking duration time, the user can
also set the cooking start time (up to 12 hours after the current time). To
set the cooking start/end time, proceed as follows.
-
Set the cooking duration time as described in the previous point.
-
Within 6/7 seconds after the last time the
press the
the current time with the inside segments indicating the cooking end
time illuminated. Use the
time.
-
6/7 seconds after the last time a key is pressed, the display will
show the current time and the cooking start and end times, indicated
by the illuminated inside segments. The segments on the display
will be constantly on until the current time is the same as the
cooking start time; as soon as the current time reaches the cooking
start time set, all the inside segments will start to flash, indicating
that the oven has started cooking.
-
When the end of the cooking time is reached, the timer will switch
off the oven heating elements, the beeps will start and the numbers
on the dial will flash.
-
To reset the entire program set, keep the central key
1 or 2 seconds: if cooking has already started the oven will have to
be switched off by hand.
-
The image on the right shows an example of
programming: the current time is 7.06 and
cooking is programmed to start at 8 o'clock
and finish at 9.
-
At 8 o'clock, the inside segments between 8
and 9 will start to flash and the hour pointer will
remain still.
Caution: for the oven to start cooking after the programming
procedure just described, the thermostat and function selector must
be properly set on the temperature and function required.
5.2.4 "DEMO" Function
Models with analogue/digital programmer feature a "DEMO" function
which deactivates the heating elements while leaving the other functions
unchanged. To activate it, simply press the
seconds. A confirmation beep will inform the user that the function is
active. To deactivate it, simply repeat the same procedure.
key to set the cooking start time. The display will show
and
or
keys are pressed,
keys to set the cooking start
,
and
keys for 3/4
pressed for
19

Advertisement

Table of Contents
loading

Table of Contents