Sagem COSY Phone Manual page 44

Using TAGs
To use a TAG, simply touch the back of your COSY Phone
slowly across these symbols:
The COSY Phone will then respond and ask you to confirm the
action that you want to do.
Duplicate TAG
Go in the Application menu then NFC menu, select the
Duplicate option, then simply touch the back of your COSY
Phone slowly across the TAG to duplicate. Once prompt by
the COSY Phone simply touch the back of your COSY Phone
slowly across the TAG to set.
NOTE:
- If the content in the TAG is not a normal NDEF message , it
will display "Unknow TAG data".
- If the TAG is not supported by the NFC, it will display "A card
detected".
- When keypad is locked and back light is off, TAG can not
be read.
WARNING:
- Don't place TAGs on metal or other conductive surfaces,
as it would not work on this material.
- Don't remove the NFC antenna located inside the back
cover.
44 Applications