Smeg S20XMF Instruction Manual page 16

Instructions for the user
6.6 Spit roasting (models with static oven)
FUNCTION SWITCH
THERMOSTAT SWITCH IN POSITION 200
Prepare the spit with the food, blocking fork screws A. Insert frame B
into the third guide from the bottom. Remove handle D and position the
spit shaft so that pulley E is guided on the link of frame B in the right
side. Insert the drip tray into the oven as far as it will go until the tip of the
rod is in line with the hole C. Now rock the frames B to insert the tip of
the rod into the drive connection C of the rotisserie motor on the side of
the oven. Pour a bit of water into the pan to avoid smoke from the
dripping.
It is normal for the thermostat light to flash during cooking. This indicates
the temperature inside the oven is regular.
CAUTION: the frames B must be fitted
as shown in the diagram
40