Belkin OMNIVIEW PRO3 F1DA208ZEA Quick Install Manual page 3

Step 1. Mount the Switch
The PRO3 Dual-User KVM Switch includes adjustable mounting brackets ideal for
installation in 19-inch racks. The mounting brackets feature three adjustment positions
to allow you to set the Switch's face flush with the ends of the rails or to extend the
Switch past the front of the rails. Please follow these simple steps to achieve the
desired adjustment.
1.1 Determine how far you would like the Switch to protrude from
the rack. Select a bracket-hole scheme.
1.2
Attach the bracket to the side of the Switch using the Phillips
screws provided. (Refer to diagram below.)
Mount the Switch | 2