Sony DSC-RX10M4 Help Manual page 150

To set the exposure compensation value using the MENU
You can adjust the exposure compensation value within a range of -3.0 EV to +3.0 EV when the exposure compensation
dial is set to "0."
MENU→ (Camera Settings1) → [Exposure Comp.] → desired setting.
Note
You cannot perform the exposure compensation in the following shooting modes:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
When using [Manual Exposure], you can perform the exposure compensation only when [ISO] is set to [ISO AUTO].
The settings of the exposure compensation dial will be prioritized over [Exposure Comp.] in MENU.
You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory
effect.
When you set the exposure compensation dial to "0" from a setting other than "0," the exposure value switches to "0" regardless
of the [Exposure Comp.] setting.
Related Topic
Exp.comp.set
Cont. Bracket
Single Bracket
Zebra
4-725-901-11(2) Copyright 2017 Sony Corporation
150