Sony WALKMAN NWZ-A15 Help Manual page 393

Help Guide
Troubleshooting
Digital Media Player
NWZ-A15/A17
You cannot connect with one touch (NFC).
When a dialog is displayed on the screen, follow the on-screen instructions to complete the connection. When you
connect your Walkman and the Bluetooth audio device for the first time, you need not only to touch the marks
together but also to pair the devices.
If your Walkman does not recognize the Bluetooth audio device, slowly move the Walkman in all directions with the
N-mark touching over the N-mark of the Bluetooth audio device.
If a clip or case is attached to the device to connect with or to your Walkman, remove the clip or case.
The NFC reception sensitivity of the device you use may be insufficient to make a one-touch connection (NFC). In this
case, make the Bluetooth connection with pairing.
One-touch connection (NFC) cannot be made while your Walkman is connected to a computer, as the Walkman is
inoperable during that time. Disconnect the Walkman from the computer and try again.
Depending on the Bluetooth audio device, the NFC function or the power may need to be turned on. Refer to the
operating instructions of the Bluetooth audio device for details.
One-touch connections (NFC) cannot be made while the HOLD function of your Walkman is enabled. Release the
HOLD function before touching the devices together to make a one-touch connection.
One-touch connections (NFC) cannot be made while your Walkman is in standby mode and the screen is off. Turn
the screen on before touching the devices together to make a one-touch connection.
Related Topic
Making a Bluetooth connection using the NFC function
Pairing and connecting with a Bluetooth audio device
Connecting with a paired Bluetooth audio device
Using the HOLD switch
Turning the power on
4-540-313-13(1)
Copyright 2014 Sony Corporation
381