Sony WALKMAN NWZ-A15 Help Manual page 20

Help Guide
How to Use
Digital Media Player
NWZ-A15/A17
Setting wireless playback quality (system software version 1.10 or later)
You can set whether to prioritize the stability of the connection or the sound quality for a Bluetooth connection as you
like.
1. From the Home menu, select
2. Select [Bluetooth Settings] - [Wireless Playback Quality] - desired setting.
[Prioritize Sound Quality]
Sound is transmitted in high quality, but the connection may become unstable depending on the usage environment.
[Standard]
Both sound quality and connection are stable.
[Prioritize Connection]
The sound quality may not be as good as the other mode, but the connection status will most likely be stable. This
setting is recommended if the connection is unstable.
[Select]
You can set the wireless playback quality setting of your choice. However, the setting may be changed depending on the
status of the connected Bluetooth audio device.
Hint
Change the setting to [Prioritize Connection] if the connection is unstable due to the usage environment.
The wireless playback quality setting is automatically selected depending on the status of the connected Bluetooth
audio device when [Prioritize Sound Quality], [Standard] or [Prioritize Connection] is selected. The selected mode is
displayed when the connection is established.
The [Wireless Playback Quality] setting switches to [Standard] when you have updated the system software of your
Walkman from a version earlier than 1.10 to version 1.10 or later. The wireless playback quality setting switches to
[Standard] also when the Walkman has been reset to the factory settings.
Note
The [Wireless Playback Quality] setting cannot be changed while your Walkman is connected to a Bluetooth audio
device. To change the setting, disconnect the connection.
Changing the [Wireless Playback Quality] setting may not have any effect depending on the settings of the connected
Bluetooth audio device.
[Settings].
8