Supermicro SC101iF User Manual page 14

SC101iF Chassis User's Manual
3. Place the drive into the tray and secure it to the tray with the screws provided with drive.
4. Return the drive tray assembly into the chassis, aligning the tabs of the tray with the
slots in the chassis. Secure the tray to the chassis support bracket with the screws
previously set aside.
5. Attach the SATA cable to the motherboard connector. This cable carries both the SATA
signal and the SATA power.
6. Reinstall the chassis cover and power up the system.
Figure 2-3. Installing the Hard Drive
14