Table of Contents
Advertisement
SC101iF Chassis User's Manual
2.2 Accessing the System
The SC101iF features a removable top cover to access to the inside of the chassis.
Removing the Top Cover
1. Power down the system as described in section 2.1.
2. Remove the two screws on the rear of the chassis that hold the cover in place.
3. Slide the cover to the rear to release the front and rear cover hooks from the chassis.
4. Lift the cover up and off the chassis.
Caution: Except for short periods of time, do not operate the server without the cover in
place. The chassis cover must be in place to allow proper airflow and prevent overheating.
Figure 2-1. Removing the Chassis Cover
12
3
2
Advertisement
Table of Contents
