User Instructions; Description Of The Controls - Smeg ST1108 Instruction Manual

User instructions

1. Description of the controls

1.1 Upper panel
All the dishwasher controls are grouped on the upper panel. Switch-on,
programming, switch-off etc. procedures are only possible when the door
is open.
ON/OFF BUTTON
1
Pressing this button energises the appliance.
SELECTED PROGRAM INDICATOR LIGHTS
2 Illumination of this light denotes the program selected and the
occurrence of a fault (troubleshooting).
PROGRAM SELECTION BUTTON
3 By pressing this button in sequence it is possible to select the desired
program.
SALT WARNING LIGHT (certain models only)
4
Illumination of this light signals that salt container is empty.
RINSE AID WARNING LIGHT (certain models only)
5
Illumination of this light signals that rinse aid dispenser is empty.
EXTRA PROGRAM BUTTON
6 This button gives access to the one of the five extra programs (see
table).
EXTRA PROGRAM LIGHT
7 Illuminates to indicate that one of the five extra programs (see table) is
going to be executed.
PROGRAM DELAY BUTTON (on some models only)
8
Press this button to delay the start of the program by up to 9 hours.
INFORMATION DISPLAY (on some models only)
9