Controls & Components - Grizzly G0803Z Owner's Manual

Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–5 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
Basic Controls & Components
B
A
Figure 1. Basic Controls & Components.
A. ON/OFF Paddle Switch w/Removable Key:
Turns machine ON and OFF. Remove key to
disable machine.
B. Laser Sight w/ON/OFF Switch: Projects
down length of blade and onto workpiece to
help guide cut.
C. Chip Blower: Gently blows dust and debris
away from cutting area.
D. LED Worklamp w/ON/OFF Button:
Illuminates cutting area for better visibility.
-4-
manual BEFORE
C
D
Fence & Miter Gauge
A
Figure 2. Fence and miter gauge controls.
A. Fence: Used for ripping, resawing, or cut-
ting tenons. Distance from blade determines
width of cut.
B. Miter Gauge: Used for cross cuts. Adjusts
60° left or right.
C. Miter Gauge Lock Knob: Secures angle
position of miter gauge.
D. Fence Lock Handle: Secures fence position.
Guide Post
E
F
Figure 3. Guide post controls.
E. Guide Post Adjustment Knob: Rotate
to adjust height of blade guides above
workpiece.
F. Upper Blade Guide: Supports blade above
workpiece during operations.
G. Guide Post Lock Knob: Secures height of
blade guides.
Model G0803Z (Mfd. Since 12/18)
B
C
D
G