Belkin OMNIVIEW F1DE108B User Manual page 10

P74042_F1DE108E_man.qxd 5/6/02 10:06 AM Page 16
INSTALLATION
DIP SWITCH CONFIGURATION CHART
DIP SWITCH#
DOWN DOWN DOWN DOWN
UP DOWN DOWN DOWN
DOWN UP DOWN DOWN
UP UP DOWN DOWN
DOWN DOWN UP DOWN
UP DOWN UP DOWN
DOWN UP UP DOWN
UP UP UP DOWN
DOWN DOWN DOWN UP
UP DOWN DOWN UP
DOWN UP DOWN UP
UP UP DOWN UP
DOWN DOWN UP UP
UP DOWN UP UP
DOWN UP UP UP
UP UP UP UP
Example:
Four KVM Switches (F1DE108B) are daisy-chained together to
control 32 computers. The DIP Switch on the Primary Switch is set to
"BANK address 00" and the Secondary Switches are each set to a unique
BANK (between 01 and 15).
Installation
Before you begin:
1. Make sure that all computers and KVM Switches are powered off and
that each KVM Switch has been assigned a unique BANK address.
2. Place all Primary and Secondary Switches in the desired location.
3. Connect the servers to the KVM Switch as previously described for a
standalone configuration.
4. Connect the Console monitor, keyboard, and mouse to the Console
ports of the Primary KVM Switch(es), as previously described for
standalone configuration, skipping steps 5 and 6.
BANK ADDRESS
BANK 00 PRIMARY / SECONDARY (Default)
BANK 01 PRIMARY / SECONDARY
BANK 02 PRIMARY / SECONDARY
BANK 03 PRIMARY / SECONDARY
BANK 04 SECONDARY
BANK 05 SECONDARY
BANK 06 SECONDARY
BANK 07 SECONDARY
BANK 08 SECONDARY
BANK 09 SECONDARY
BANK 10 SECONDARY
BANK 11 SECONDARY
BANK 12 SECONDARY
BANK 13 SECONDARY
BANK 14 SECONDARY
BANK 15 SECONDARY
16
INSTALLATION
Example of Daisy-Chain Configuration:
console
USB
bank
select flash daisy chain IN
1 2 3 4
PS/2
reset daisy chain OUT
console
USB
bank
flash daisy chain IN
select
1 2 3 4
PS/2
reset daisy chain OUT
console
USB
bank
select flash daisy chain IN
1 2 3 4
PS/2
reset daisy chain OUT
console
USB
bank
select flash daisy chain IN
1 2 3 4
PS/2
reset daisy chain OUT
Connecting the Daisy-Chain Cable
5. Using the Daisy-Chain Cable (F1D9402-XX), connect one end to the
"Daisy-Chain OUT" port on the first KVM Switch.
6. Connect the other end of the Daisy-Chain Cable to the "Daisy-Chain
In" port of the second KVM Switch.
Note: It does not matter which unit is the Primary Switch, only that the
cables are always connected "OUT to IN" or "IN to OUT".
Adding Additional Units
7. Continuing in the same manner, using the Daisy-Chain Cable
(F1D9402-XX), connect "Daisy-Chain IN" to "Daisy-Chain OUT" on
all subsequent units.
*** Cautions and Warnings ***
Never connect "Daisy-Chain IN" to "Daisy-Chain IN" or "Daisy-Chain
OUT" to "Daisy-Chain OUT". This may produce unpredictable results
and may cause damage to the KVM Switch.
17
CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08
90-264 VAC. 47-63 Hz
CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08
90-264 VAC. 47-63 Hz
CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08
90-264 VAC. 47-63 Hz
CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08
90-264 VAC. 47-63 Hz