Description Of The Controls; Front Panel; Washing Programs - Smeg DWD63BLE Instruction Manual

3. Description of the controls

3.1
All the dishwasher controls are grouped on the front panel.
10
11
3.2
Before starting a washing program make sure that:
•
•
•
•
•
HALF LOAD WASH SETTING
This function is especially suitable for loads up to 6 place settings and allows saving of water and
electricity. It is controlled by the HALF LOAD button (4) and allows washing in the upper basket
only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.
28
User instructions

Front panel

1
WASHING PROGRAM SELECTOR
2
ON/OFF BUTTON
3
START/STOP BUTTON
4
½ LOAD WASH BUTTON (certain models only)
5
POWER ON LIGHT
6
SALT WARNING LIGHT
7
RINSE AID WARNING LIGHT
8
PROGRAM PHASE INDICATOR LIGHTS (
9
BUTTON FOR DELAYED START FROM 1 TO 9 HOURS (certain models only)
DELAYED START INDICATOR DISPLAY (certain models only)
RECESSED DOOR HANDLE

Washing programs

The water supply tap is open.
The correct amount of detergent has been added to the dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without obstruction.
The dishwasher door is securely closed.
light off / light on)