Smeg Dishwasher DI612CAH Instruction Manual page 4

After using the table to identify the most appropriate washing program:
• press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
•
keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
•
close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
PROGRAMME, LOAD CROCKERY
NUMBER & SYMBOL AND CUTLERY
Pans and dishes
1 SOAK
a further wash
Wash immediately
2
after use for dishes
LIGHT
with light dirt
Wash immediately
BIO (*)
3
after use for dishes
EN 50242
with normal dirt
4
NORMAL
with normal dirt
Very dirty pans and
5
INTENSIVE
dishes (except
delicate items)
Only run the soak program with half loads.
The HALF LOAD option (6) is available for all programs except the soak program.
(*) Reference program as per EN 50242 standard.
–
( ) Not present.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and
room temperatures, and the type and amount of dishes.
The washing cycle will not take place if the dishwasher door is left open
or not properly closed.
User instructions
PROGRAM
PROGRESS
Cold prewash
awaiting
Wash at 45°C
Cold rinse
Rinse at 68°C
Dry
Cold prewash
Wash at 50°C
Rinse at 64°C
Dry
Cold prewash
Wash at 65°C
Dishes
Cold rinse
Rinse at 68°C
Dry
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
DURATION CONSUMPTION
MINUTES WATER POWER
(2) LITRES (1) KWh (2)
6
15'
0,03
70'
12 1,00
160' 17 1,05
90'
17 1,30
110' 20 1,60
15