Affixing The Type Plate; 300 L Capacity; Installing The Sensor Well And The Cylinder Temperature Sensor - Viessmann VITOCELL 300-W Installation Instructions And Setup Manual

Affixing the type plate

Fig. 5
Type plate
A

300 l capacity

Installing the sensor well and the cylinder temperature sensor

Note
The sensor retainer is in the sensor well.
2.
3.
Fig. 6
A
1.
4.
1. Extract the sensor retainer.
2. Fit the sensor to the outside of the sensor retainer
contact spring (not in the groove).
Note
The sensor must sit flush with the front of the
■
spring.
■ Never wrap insulating tape around the sensor.
3. Insert the sensor retainer with sensor into the sen-
sor well as far as it will go.
9