Quick Setup - Belkin F5D6130 User Manual

crossover cable). This connection from your wired LAN would come from
a hub or switch connected to your LAN or a cable/DSL router.
2.Connect the external power supply to the 5V DC socket on the rear panel
of the WAP.
Step 3: Install the Belkin WAP Manager Software
1.Insert the CD into the CD-ROM drive.
2.Access your CD-ROM drive by double-clicking on the CD-ROM icon in
the "My Computer" window. Double-click on the "Setup" icon and follow
the directions in the installation wizard.
Step 4: Configure the Wireless-Equipped Computer(s) to Communicate with
the WAP
1.Start up the wireless-equipped computer and configure the
wireless-equipped PC to connect to an SSID of "WLAN" or "Any".
2.If not done already, configure the wireless-equipped PC to "Obtain IP
Address Automatically".
3.Restart the wireless-equipped PC.
Your Belkin WAP is now fully configured. To configure advanced features,
please reference the Installation section.
Default Settings
WAP Parameter
AP Name
SSID
Channel
RTS Threshold
IP Address
Subnet Mask
Default Gateway
DHCP Client
Encryption
MAC Address Filter
Password

Quick Setup

:
MiniAP
WLAN
11
2346
192.168.0.254
255.255.255.0
0.0.0.0
Enabled
Disabled
Disabled
MiniAP (case-sensitive)
Default Value
7