Quick Setup
Quick Setup—Connecting the WAP to your
existing network
The factory settings of the Belkin WAP were chosen to get you up and
running quickly.
Desktop PC
Desktop PC
Cable/DSL
Modem
Notebook with Wireless
Notebook Network Card
Belkin Router
or Switch
Wireless
Access Point
Notebook with Wireless
Notebook Network Card
Step 1: Installation Site Selection
In general, the best location to place the WAP is at the center of your wireless
coverage area, within line-of-sight of all wireless stations. Ensure all stations are
within the service range of the WAP.
Step 2: Hardware Setup
1.Connect your wired LAN to the WAP via a 10Mbps connection using a
Category 3 or Category 5 cable with a standard RJ45 connector (not a
6