Changing Proxy Recording Settings; About The Recorded File; Storage Destination Of The Recorded File; About The File Name - Sony PXW-Z190V Operating Instructions Manual

Changing proxy recording settings

Setting the picture size
Select Proxy Rec >Proxy Format in the
Recording menu, and set the picture size.
Setting the audio channel
Select Proxy Rec >Audio Channel in the
Recording menu, and set the audio channel for
proxy recording.

About the recorded file

The file name extension is ".mp4".
The timecode is also recorded simultaneously.
Storage destination of the
recorded file
The recorded file is stored under the "/PRIVATE/
PXROOT/Clip" directory.

About the file name

The file name consists of the clip name recorded
on the memory cards in the memory card slots
and a consecutive number suffix.
In 2-slot Simul Rec mode, the clip name of slot A
has precedence.
• The consecutive number is kept even if the camcorder
is turned off. The consecutive number returns to 0001
by executing All Reset.
For details about clip names, see Clip Naming
(page 87) in the Media menu.

Recording proxy data only

You can record proxy data independently to an
SD card in the UTILITY SD/MS slot without
recording to a memory card in a memory card
slot.
The recording format of the proxy data is the
same as for simultaneous recording.
However, the file name is derived from the
timecode at the recording start time.
Example: If the timecode at the recording start
time is "14:30:20:05" then the file name becomes
"14_30_20_05.mp4".
Configuring before shooting
1
Assign Proxy Rec Start/Stop to an
assignable button (page 34).
2
Set Proxy Rec >Setting in the Recording
menu to On.
3
Insert the SD card media into the
UTILITY SD/MS slot (page 8) with the
label facing right.
Recording
Start the recording after completing the required
setting.
Press the assignable button assigned with
Proxy Rec Start/Stop.
To stop recording, press the assignable button.
44