Table of Contents
Advertisement
Lane Link LEDs
Lane Link LEDs
The Lane Link LEDs indicate which of the break out lanes are being checked. If none of the Lane Link LEDs
is lit, all four lanes are being checked.
LED Lit
1
2
3
4
None
Fan Module LEDs
The fan module LED is located below the air holes on the front of the module.
LED
STS
Power Supply LEDs
The power supply LEDs are located on the left front portion of the power supply. Combinations of states
indicated by the Okay (
table.
Cisco Nexus 9236C NX-OS Mode Switch Hardware Installation Guide
54
LED
(port)
Green
Amber
Off
Color
Status
Green
The fan module is operational.
Red
The fan module is not operational (fan is probably not functional).
Off
Fan module is not receiving power.
) and Fault (
Color
Description
Checking lane 1.
Checking lane 2.
Checking lane 3.
Checking lane 4.
Checking all four lanes
) LEDs indicate the status for the module as shown in the following
Status
Port admin state is 'Enabled', SFP
is present and the interface is
connected (that is, cabled, and the
link is up).
Port admin state is 'Disabled, or the
SFP is absent, or both.
Port admin state is 'Enabled' and
SFP is present, but interface is not
connected.
LEDs
Advertisement
Table of Contents
