Table of Contents
Advertisement
Overview
2
3
To determine which transceivers, adapters, and cables are supported by this switch, see the
Modules Compatibility Information
The following figure shows the switch features on the power supply side of the chassis.
1
2
3
4
5
Depending on whether you plan to position the ports in a hot or cold aisle, you can order the fan and power
supply modules with port-side intake or port-side exhaust airflow. For port-side intake airflow, the fan and
AC power supply modules have burgundy coloring (DC power supply modules have green coloring). For
port-side exhaust airflow, the fan and AC power supplies have blue coloring (DC power supply modules have
gray coloring). You can also order the 1200-W HVAC/HVDC power supply which has dual-direction airflow
Lane link status LEDs for
5
4x10-Gigabit port
configuration (1 LED lit
to show the lane being
checked or all LEDs off
when all 4 lanes are being
checked)
Lane shift button
6
document.
Power supply modules (1
6
or 2) (AC power supplies
shown) with slots
numbered 1 (left) and 2
(right)
Fan modules (4) with slots
7
numbered from 1 (left) to
4 (right)
L1 port (software defined)
8
L2 port (software defined)
9
Beacon (BCN) and Status
10
(STS) LEDs
Cisco Nexus 9236C NX-OS Mode Switch Hardware Installation Guide
Overview
Screw holes (6) for
attaching a mounting
bracket
Grounding pad
Cisco Transceiver
Console port (1)
USB port (1)
Management port (RJ-45)
Screw holes (6) for
attaching a mounting
bracket
Grounding pad
3
Advertisement
Table of Contents
