Brother ScanNCut DX Embossing Tool Set Operation Manual

EN Embossing Tool Set
About the Embossing Tool Set
By using the embossing tools with the cutting machine, you can create embossing by pressing a pattern into the material* for either a
recessed effect or, by flipping over the material, a raised effect.
Use this kit to create custom embossed projects.
* Use paper and metal sheet only for the material.
About region embossing
For details on the region embossing procedure, refer to "Consumables & Options" at the Brother Solutions Center
●
(http://s.brother/ccoab/).
The following optional accessories will be necessary for region embossing.
●
- Embossing template sheets (CAEBSTS1) (F)
- Scanning support sheet (CASTCL1 (stencil sheet)) (G)
Precautions
Use the embossing mat when you emboss. Embossing mat can be purchased separately. CAEBSMAT1(embossing mat) (D)
●
When embossing metal sheets, be sure to use genuine Brother metal sheets. Metal sheets can be purchased as optional
●
accessories. CAEBSSMS1 (embossing silver metal sheets) or CAEBSBMS1 (embossing brass metal sheets). (E)
Do not insert any object other than the embossing tools into the embossing tool holder.
●
Do not cut while using the embossing mat.
●
If the adhesive strength of the embossing mat is reduced, lightly wipe it with a wet wipe (recommended to use an alcohol-free wet
●
wipe), to remove any dust or dirt. After wiping the mat, be sure to allow it to dry. If the mat becomes wet, its surface will become
brittle.
If material can no longer be attached to the embossing mat, replace the mat with a new one.
●
Without peeling the embossing mat off the cutting mat, affix the protective sheet for the cutting mat before storing the mats.
●
Do not store in a location exposed to direct sunlight, high temperatures or high humidity.
●
Use in an environment between 10 °C and 35 °C (50 °F and 95 °F).
●
For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
●
The contents of this document are subject to change without notice.
●
The screens in this manual are for illustration purposes only and may differ from the actual screens.
●
1
Version 0