Scene Screen - Steinberg AXR4T Operation Manual

6 LINE OUT meter
7 ADAT A or S/PDIF A OUT meter
8 ADAT B or S/PDIF B or AES/EBU
OUT meter
9 Output meter to computer
) PHONES OUT meter
3 ADAT A or S/PDIF A IN meter
4 ADAT B or S/PDIF B or AES/EBU IN meter
7 ADAT A or S/PDIF A OUT meter
8 ADAT B or S/PDIF B or AES/EBU OUT meter
Contents displayed for the above items will change
depending on the Digital I/O mode and sample rate in
use.
How to use the METER screen
1.
Turn the multi-function knob to display the
MAIN OUT VOLUME dialog.
2.
Turn the multi-function knob while the
MAIN OUT VOLUME dialog is displayed to
adjust the level of the mix bus being set by
the MAIN OUT VOLUME setting.
You can set the channels being set by the MAIN
OUT VOLUME setting on the MAIN OUT SETUP
screen (page 20).
Panel Controls and Functions (Main Panel)

SCENE Screen

This screen is used to store and recall scenes.
How to open the SCENE screen
Press the [SCENE] key on the AXR4 device
panel to open the SCENE screen.
MAIN display area
This area displays scenes in a list. An asterisk
(*) will appear to the left of the most recently
recalled scene.
• Up to nine scenes can be recorded.
• The Initial Data scene is a scene used to restore mixer
settings to the default factory settings.
AXR4 Operation Manual 10