Omron CJ2 Series Network Connection Manual page 59

10. Appendix 2 Setting the Tag Data Links Using the Software
11
The Synchronization Dialog Box
is displayed.
Confirm that the data to transfer
(NJ501 in the right dialog box) is
selected. Then, click the
Transfer To Controller Button.
*After executing Transfer To
Controller, the Sysmac Studio
data is transferred to the
Controller and the data are
compared.
12
A confirmation dialog box is
displayed. Confirm that there is
no problem and click the Yes
Button.
A screen stating "Synchronizing"
is displayed.
A confirmation dialog box is
displayed. Confirm that there is
no problem and click the No
Button.
*Be sure not to return it to "RUN
mode".
56