Omron CJ2 Series Network Connection Manual page 55

10. Appendix 2 Setting the Tag Data Links Using the Software
3
After entering, right-click and
select Create New from the
menu.
4
Enter the following data in the
new columns in the same way
as steps 2 and 3.
•Name: EIP002_D10000_IN
Data type: WORD[10]
Retained: Retained
Network Publish: Input
5
Double-click Task Settings
under Configurations and
Setup in the Multiview Explorer.
The Task Settings Tab Page is
displayed in the Edit Pane. Click
the Settings for Exclusive
Control Variables in Tasks
Button.
Click the + Button.
6
Click the Down Button under
Variable to be refreshed. The
variables set in steps 2 to 4 are
displayed.
Select EIP002_D10100_OUT.
8
Click the + Button and select a
variable to be refreshed.
*The data types are displayed
automatically, and you do not
have to set them.
Add all variables set in step 4 as
shown in the right figure.
52