Significance Of The Leds For The Voltage Sensing Module Vsm10 - Siemens Sinamics G130 Operating Instructions Manual

Electrical installation
4.3 Interface description
4.3.8

Significance of the LEDs for the Voltage Sensing Module VSM10

Table 4- 7 Description of the LEDs on the Voltage Sensing Module
LED Color
READY ---
Green
Orange
Red
Green/red
Green/orange
or
red/orange
24
Status
OFF The electronics power supply is missing or lies outside the permissible
tolerance range.
Continuous light The component is ready for operation and cyclic DRIVE-CLiQ communi-
cation is taking place.
Continuous light DRIVE-CLiQ communication is being established.
Continuous light This component has at least one fault.
Remark:
The LED is activated irrespective of whether the corresponding messag-
es have been reconfigured.
Flashing 0.5 Hz Firmware is being downloaded.
Flashing 2 Hz Firmware download is complete. Waiting for POWER ON.
Flashing light Detection of the components via LED is activated (p0144).
Remark:
Both options depend on the LED status when module recognition is
activated via p0144 = 1.
Description
Voltage Sensing Module 10 (VSM10)
Operating Instructions, 11/2017, A5E02142235A