Electrical Fuses - Mercedes-Benz E-Class Wagon 2019 Operator's Manual

Installing the towing eye
Press the mark on cover 1
#
remove.
Screw in the towing eye clockwise as far as it
#
will go and tighten.
% Make sure that cover 1 engages in the
bumper when you remove the towing eye.
* NOTE Damage due to incorrect use of
the towing eye
When a towing eye is used to recover a vehi‐
cle, the vehicle may be damaged in the proc‐
ess.
Only use the towing eye to tow away or
#
tow start the vehicle.
Tow starting the vehicle (emergency engine
start)
Vehicles with automatic transmission
* NOTE Damage to the automatic trans‐
mission due to tow starting
The automatic transmission may be damaged
inwards and
in the process of tow starting vehicles with
automatic transmission.
Vehicles with automatic transmission
#
must not be tow started.
Vehicles with automatic transmission must
#
not be tow-started.
Breakdown assistance 391

Electrical fuses

Notes on electrical fuses
& WARNING Risk of accident and injury
due to overloaded lines
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher
amperage, the electric line could be overloa‐
ded.
This could result in a fire.
Always replace faulty fuses with speci‐
#
fied new fuses containing the correct
amperage.
* NOTE Damage due to incorrect fuses
Electrical components or systems may be
damaged by incorrect fuses, or their func‐
tionality may be significantly impaired.
Only use fuses that have been approved
#
by Mercedes-Benz and which have the
correct fuse rating.