Mercedes-Benz C-Class Coupe 2019 Operator's Manual page 417

* NOTE Engine damage caused by an
incorrect oil filter, incorrect oil or addi‐
tives
Do not use engine oils or oil filters other
#
than those which meet the specifica‐
tions necessary for the prescribed
service intervals.
Do not alter the engine oil or oil filter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed after the
#
prescribed intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Further information on engine oil and oil filters is
available at the following locations:
In the Mercedes-Benz Specifications for
R
Operating Fluids by entering the designation:
At http://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo app
-
at a qualified specialist workshop
R
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Gasoline engine MB-Freigabe or MB-
All models 229.51, 229.52,
229.61, 229.71
The following values refer to an oil change,
including the oil filter.
Replacement amount
Model Replacement
C 300 7.0 US qt (6.6 liters)
C 300 4MATIC 6.3 US qt (6.0 liters)
Notes on brake fluid
Observe the notes on operating fluids
( page 412).
/
& WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
from the air. This lowers the boiling point of
Approval
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
Have the brake fluid renewed at the
#
specified intervals.
Have the brake fluid regularly replaced at a
amount
qualified specialist workshop.
Only use brake fluid approved by Mercedes-Benz
according to MB-Freigabe or MB-Approval 331.0.
You can obtain further information on brake fluid
in the following places:
in the Mercedes-Benz Specifications for
R
Operating Fluids
at http://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo App
-
Technical data 415