Mercedes-Benz C-Class Coupe 2019 Operator's Manual page 362

360 Breakdown assistance
Affix part 1 of the TIREFIT sticker to the
#
instrument cluster within the driver's field of
vision.
Affix part 2 of the TIREFIT sticker near the
#
valve on the wheel with the faulty tire.
Pull plug 4 with the cable and hose
#
of the tire inflation compressor housing.
Push the plug of hose
#
tire sealant bottle
Place tire sealant bottle
#
into recess 2 of the tire inflation compres‐
sor.
Remove the cap from valve
#
tire.
Screw filling hose
#
Insert plug 4 into a 12 V socket in your
#
vehicle.
5 out
Switch on the ignition.
#
5 into flange 6 of
#
1 until the plug engages.
1 head downwards
Do not switch off the tire inflation compres‐
sor during this phase.
#
If tire sealant leaks out, make sure you clean the
affected area as quickly as possible. It is prefera‐
7 on the faulty
ble to use clear water.
If you get tire sealant on your clothing, have it
8 onto valve 7.
cleaned as soon as possible with perchloroethy‐
lene.
Press on and off switch 3 on the tire infla‐
tion compressor.
The tire inflation compressor is switched on.
The tire is inflated. First, tire sealant is pum‐
ped into the tire. The pressure may briefly
rise to approximately 500 kPa (5 bar/73 psi).
Let the tire inflation compressor run for a
maximum of ten minutes.
The tire should then have attained a tire
pressure of at least 200 kPa (2.0 bar/
29 psi).