SMC Networks SMC7724M/VSW Installation Manual page 25

LED Condition
VDSL Ports
Link On Green
Flashing Amber
Off
Activity Flashing Green
Off
Ethernet Port
Link On Amber
On Green
Flashing Amber
Flashing Green
Activity Flashing Green
Off
LED Condition
Power On
Diag Flashing Green
On Green
On Amber
Stacking* On/Off
Master* On/Off
*Stacking is not supported in the current firmware version.
Port Status LEDs
Port has a valid connection, port enabled.
Port has a valid connection, port disabled.
Port does not have a valid connection.
Shows that traffic is crossing the port.
Shows that no traffic is crossing the port.
Port is operating at 1000 Mbps.
Port is operating at 100 Mbps.
Port is operating at 10 Mbps.
Port is disabled.
Shows that traffic is crossing the port.
Shows that no traffic is crossing the port.
System Status LEDs
Switch is receiving power.
The system diagnostic test is in progress.
The system diagnostic test has completed
successfully.
The system diagnostic test has detected a fault.
Shows that the stacking link is connected/
disconnected.
The switch is the master/slave switch in the stack.
D
ESCRIPTION OF
Status
Status
H
ARDWARE
1-11