Advertisement
11. When fl ash-upgrading the SMB Manager, the warning below will appear. Select "No" if you would like to retain your current on-screen display settings;
selecting "Yes" will reset the OSD to the factory defaults.
12. After the fl ash-upgrade process is complete, click on "Options", and "Advanced", and then click on "Reset Device".
13. The fi rmware upgrade process is now complete; uncheck the box next to the component you have upgraded.
14. You can now repeat steps 6 through to 13 on all additional components. If you are upgrading the remote units, you can select multiple dongles with the
same connection type, e.g., PS/2, and simultaneously fl ash-upgrade the fi rmware on all PS/2 dongles.
© 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
OmniView
SMB CAT5 KVM Switch
®
Belkin Tech Support
US: 800-223-5546 ext. 2263
310-898-1100 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 800 616 1790
Belkin Corporation
501 West Walnut Street
Los Angeles, CA 90220-5221, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
Belkin Ltd.
7 Bowen Crescent, West Gosford
NSW 2250, Australia
+61 (0) 2 4372 8600
+61 (0) 2 4372 8603 fax
25WEB062
Advertisement
