Table of Contents
Advertisement
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a screwdriver to loosen the screw.
3. Install 3 new button cell batteries (LR44)
following the diagram inside the battery
box. (The use of a new alkaline battery is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
•
Use three LR44 Alkaline button cell batteries only for this toy.
•
The button cell batteries used with this product should be kept away
from small children who might still put things in their mouths. If the
button cell batteries are swallowed, consult a doctor immediately.
•
Insert the button cell batteries with the correct polarity.
•
Do not use damaged button cell batteries.
•
Do not short-circuit the button cell battery terminals.
•
Remove exhausted button cell batteries from the product.
•
Remove button cell batteries during long periods of non-use.
•
Do not dispose of button cell batteries in fire.
•
Do not charge non-rechargeable button cell batteries.
•
Remove rechargeable batteries from the toy before charging.
•
Rechargeable batteries are only to be charged under adult
supervision.
•
Do not mix old and new batteries.
•
Do not mix batteries of different types: alkaline, standard
(carbonzinc) or rechargeable (nickel-cadmium).
DO NOT USE RECHARGEABLE BATTERIES.
5
Advertisement
Table of Contents
