SMC Networks Barricade SMC7908VoWBRA2 User Manual page 87

RIP
Parameter
General RIP Parameters
RIP mode
Auto summary
Table of current Interface RIP
parameter
Interface
Operation Mode
Version
Description
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will
include sub-network information from all
sub-networks connected to the router. If enabled,
this sub-network information will be summarized
to one piece of information covering all
sub-networks.
The WAN interface to be configured.
Disable: RIP disabled on this interface.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates its
route table. It does not participate in sending route
broadcasts.
Sets the RIP (Routing Information Protocol)
version to use on this interface.
A S
DVANCED ETUP
4-51