SMC Networks Barricade SMC7908VoWBRA2 User Manual page 118

C
ONFIGURING THE
Parameter
Volume Gain Control
Jitter Buffer Mode
Jitter Buffer Delay
Echo Canceller Delay
VAD
CNG
PLC
Caller ID Mode
Inter Digit Delay
Additional Ringing
Mode
T.38 Mode
4-82
V ADSL R
OICE
Description
It is recommended leaving these four settings at the
default value. Changing the settings may affect the
performance of VoIP and the voice quality.
If you should need to change these settings, consult an
experienced network administrator.
Check this box to enable the Voice Activity Detection
function.
Check the box to enable the Comfort Noise Generation
function.
This function is for G.711 only. Check the box to enable
the Packet Loss Compensation function.
By default the Barricade uses FSK Caller ID mode. To
enable DTMF Caller ID mode check this box.
This is the delay time before processing each dialed digit.
Increasing the value allows more time between dialling
digits.
Check the box to enable this function.
Check this box to enable T.38 Fax support.
OUTER