SMC Networks Barricade SMC7908VoWBRA2 User Manual page 114

C
ONFIGURING THE
Parameter
For the following 4 items, check the box to enable the function:
• Answer calls for all numbers Check this box to answer all incoming calls.
• Call Waiting
• Caller-ID Presentation
• Different dial tone for VoIP Enabling this function gives a different dial
Telephony Hook Flash Timer
4-78
V ADSL R
OICE OUTER
Description
Call Waiting plays audible tone to notify the
user that a second call is in waiting. The user
can place the existing call on hold and answer
the incoming call using hook flash. Note: Call
Hold and Call Waiting must be supported by
the VoIP provider to use this feature.
A function to display the caller's number.
tone when making VoIP calls. This feature
allows you to differentiate if the outgoing call
is over PSTN or VoIP.
This option allows you to define the length of
time in milliseconds (ms) before the hook flash
timer indicates a time-out. A hook flash is
when you ON-hook then OFF-hook the
phone. Hook flash is used to switch between
two calls.