Connecting the Power Adapter
Plug the power adapter into the power socket on the Wireless
Barricade, and the other end into a power outlet. Check the
indicator marked Power on the front panel to be sure it is on. If
the Power indicator does not light up, refer to Troubleshooting in
Appendix A.
Verify Port Status
Check the power and port indicators as shown in the following table.
LED
Power
(Green)
WLAN
(Green)
WAN
(Green)
LAN
Link
(Green)
Activity
(Amber)
Condition Status
On
Wireless Barricade is receiving power.
On
The Wireless Barricade has established a valid
wireless connection.
On
The WAN port has established a valid network
connection.
On
The indicated LAN port has established a valid
network connection.
Flashing
The indicated LAN port is transmitting or
receiving traffic.
I
NSTALLATION
2-11