SMC Networks Barricade SMC7004VWBR V.2 User Manual page 46

Configuring the Wireless Barricade Router
Point-to-Point Tunneling Protocol (PPTP)
Point-to-Point Tunneling Protocol (PPTP) can be used to join
different physical networks using the Internet as an intermediary.
Using the above screen allows client PCs to establish a normal
PPTP session and provides hassle-free configuration of the
PPTP client on each client PC.
Enter the assigned IP address, subnet mask and default gateway
IP address (usually supplied by your ISP), and then the PPTP
User ID, Password and PPPTP Gateway IP address.
The MTU (Maximum Transmission Unit) governs the maximum
size of the data packets. Leave this on the default value (1460)
unless you have a particular reason to change it.
Enter a maximum Idle Time Out (in minutes) to define a
maxi-mum period of time for which the PPTP connection is
42
please visit www.smc-europe.com
technical support team.
or contact SMC's