Installing the Wireless Barricade Router
Item
Reset
Button
LAN
Ports
WAN
Port
Power
Inlet
LEDs
System Requirements
You must have an ISP that meets the following minimum
requirements:
•
Internet access from your local telephone company or Internet
Service Provider (ISP) using a DSL modem or cable modem.
•
A PC using a fixed IP address or dynamic IP address
assigned via DHCP, as well as a gateway server address and
DNS server address from your service provider.
•
A computer equipped with a 10 Mbps, 100 Mbps, or
10/100 Mbps Fast Ethernet card, or a USB-to-Ethernet
converter.
•
TCP/IP network protocol installed on each PC that needs to
access the Internet.
•
A Java-enabled Web browser, such as Microsoft Internet
Explorer 5.0 or above, or Netscape Communicator 4.0 or
above installed on one PC at your site for configuring the
Wireless Barricade.
8
Description
Use this button to reset the power and restore the default factory
settings.
Fast Ethernet ports (RJ-45). Connect devices (such as a PC, hub
or switch) on your local area network to these ports.
WAN port (RJ-45). Connect your cable modem, DSL modem, or an
Ethernet router to this port.
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may cause
damage.
Power, WAN and LAN port status indicators.
(See "LED Indicators" on page 3.)