Wireless
To configure the Router as a wireless access point for wireless
clients (either stationary or roaming), all you need to do is define
the radio channel, the Service Set identifier (SSID), and
encryption options.
Channel and SSID
You must specify a common radio channel and SSID (Service
Set ID) to be used by the Router and all of your wireless clients.
Be sure you configure all of your clients to the same values.
ESSID: The Service Set ID. This should be set to the same value
as other wireless devices in your network.
Note:
Wireless Mode: Set the communication mode for
the Router. (Default: 11g only.)
The SSID is case sensitive and can consist of up to 32
alphanumeric characters.
Advanced Setup
43