SMC Networks Barricade SMC2804WBRP-G User Manual page 29

Barricade g Wireless Router with USB Print Server Manual
8.4.5 | Radius (802.1x)
WEP or WPA can be used in coordination with a RADIUS server is connected to the Router or on the
same Network.
Session Idle Timeout: This is the time (in seconds) that a session will be inactive before
terminating. Set 0 if you do not want the session to timeout.
Re-Authentication Period: The time interval required for the client to re-authenticate again. For
example, if you set this to 30 seconds, the client will have to re-authenticate every 30 seconds.
Quiet Period: This value is the time (in seconds) the Barricade will wait between failed
authentications.
Server IP: Set the LAN IP address of your Radius Server.
Server Port: Set the connection port that is configured on the Radius server.
Secret Key: This is the 802.1X secret key shared between the Barricade g and the Radius server.
NAS-ID: The NAS ID is an alphanumeric string or an IP address that the RADIUS server uses to
identify packets from the server. The value you enter here will be sent in the NAS-Identifier (32)
attribute in all Access-Request packets sent to this RADIUS server. By default, the NAS ID is the
name of the server.
29