SMC Networks SMCWUSBT-G User Manual page 31

Wireless USB 2.0 Adapter
Infrastructure (Access Point) Mode Profile Configuration
To configure a profile in infrastructure (access point) mode, change the Network Type in the Advanced
tab. For access point mode, modify the settings:
Transmit Power Level
Power Save Mode
802.11b Preamble (if using 802.11b)
Wireless Mode
802.11a Authentication Mode (if using 802.11a)
Ad Hoc Mode
In ad hoc mode, a wireless network adapter works within an independent basic service set
(IBSS), as illustrated here. All stations communicate directly with other stations without using
an access point (AP)
.
Ad Hoc Mode Profile Configuration
To configure a profile in ad hoc mode, change the Network Type in the Profile Management's
Advanced tab. For ad hoc mode, modify the settings:
Network Name (on General Tab)
Transmit Power Level
802.11b Preamble (if using 802.11b)
Wireless Mode When Starting an Ad Hoc Network
24